Direct Dish Pro

Posts Tagged ‘input-frequency’

Perfect for DirecWay, DirecTV, Dish Network. Perfect meter for aligning single or dual satellite systems.The SC2022pro can easily connect directly to elliptical antennas, 5X4 integrated multi-switches as well as any standard LNBF. Comes with rechargeable battery for aligning dish without the need to hook up the receiver. Features SignalCat Dual LCD Satellite Meter Pro Complete Set All new LCD display Dual satellite signal strength measurements Selectable on-off audio tone Measures individual LNBF current consumption Measures receiver voltage output Switches 22KHz on-off Adjustable LCD contrast Align Dish without receiver hook-up Tests coax cable runs Input Frequency – 950-2150MHz Input Level – 20-100dBy V Through Loss – 3.5dB Input Impedance – 75 Ohm – F connector Output Impendance – 75 Ohm – F connector Measuring Method – LCD display with full text graphics, Pitch tone on audio speaker Power Supply – From receiver through coaxial cable 12-18 VDC or Optional external 10.8V battery with center pin positive Power Consumption – 40mA-50mA utilizing audio speaker Overload Protection – 800mA LNBF current draw limiter Input Voltage Tolerance – Battery up to 18 vDC max., Receiver up to 28vDC max

Digiwave SC2022Pro – SignalCat Dual LCD Satellite Meter Pro Complete Set

With BMS-58 you can install your home theater multiplex in no time by connecting up to eight receivers with ease. There is no need to remove integrated multi-switches already embedded in your satellite dish. Simply connect the two SatA and SatB cables inputs to the BMS-58 and run your receiver outputs to the rooms you want. The BMS-58 has an ultra-low noise built-in amplifier to eliminate signal loss and deliver the best possible reception to every TV in the home. It features DC pass capability allowing it to be used with amplified antennas that require DC power via a coaxial cable. The BMS-58 is designed to be waterproof making it rugged, durable and easy-to-install. Features: *Easily connect up to eight satellite receivers *Connect an additional off air antenna or cable input *Can be used indoors and outdoors *Ultra-low noise built-in amplifier *DC pass capability to power the amplifier *Works with most dbs systems. Specifications: *Input frequency range: 950-2150 MHz (SAT) 54-806 MHz (UHF/VHF) *Output Frequency Range: 54-2150 MHz (Each Output) *Insertion Loss: 54-806 MHz -4.5dB typical / 950-1450 MHz 2dB typical / 1451-1750MHz 0dB typical / 1751-2150MHz -2dB typical *Cross Polar Isolation: 950-1750 MHz -35dB typical / 1751-2150MHz -30dB typical *Current Consumption: 60mA *Power Adaptor: 120 VAC 60Hz Input 24 VDC 1000mA / Output 22KHz Signal Characteristics *Frequency 22 + 4KHz continuous *Amplitude 650 + 300mV p-p.

Connects a single legacy satellite receiver to two single legacy LNB dishes or to one DISH 500 dish equipped with two legacy single LNBs to pick up signals form 110 and 119.* Zinc die cast housing.
* Bright tin finish and solder shielded bottom plate.
* All port F-(f) connector, 75 ohm
* Waterproof (solder back, tin plate)
Input Frequency: 950~2300 MHz
Insertion Loss: less than or equal to 4dB
Isolation: greater than or equal to 30dB
DC Current Consumption: 10mA
Max. DC Current to LNB: 500mA
Input/Output Connector: 75ohm

Dual DSS LNB for dish network, directv, bell express vu
DSS Dual Output Circular LNBF used for DirecTV DSS (legacy) satellite reception in North America. Compatible with all DBS satellite receivers.
FEATURES:

* Dual Output LNBF
* Lightweight and small size for easy installation
* Covers DSS Ku Band Satellite Frequencies 12.2-12.75 GHz
* Low Noise Figure of 0.4 dB for improved signal reception (specially on weak signal) and low interference.
* Voltage-Controlled RH/LH Switching (13/18 V)
* The feed diameter is a standard 40mm thus allowing this LNB to be mounted effortlessly on almost any offset dish
Specification

Value

Input Frequency Range

12.2 ~ 12.75 GHz

Output Frequency Range

950 ~ 1450 MHz

LO Frequency

11.250 GHz

Conversion Gain

56 dB

Cross Pol. Isolation

18 dB

Noise Figure

0.4 dB

Input Reflector Type

Offset

Gain Flatness

+/- 4 dB V.Pol and +/- 3 dB H.Pol

L.O. Frequency Stability:

(+25°C)

+/- 500 KHz

(-30°C ~ +60°C)

+1.9MHz @-30°C, -1.7MHz @+60°C

L.O. Phase Noise:

(1 KHz Offset)

-55.61 dBc/Hz

(10 KHz Offset)

-84.61 dBc/Hz

(100 KHz Offset)

-101.6 dBc/Hz

Output Connector

75Ohm F Type Female

D.C. Power Supply

10.5 – 19 V

D.C. Power Consumption

90 mA (Typ.)

Polar Switching Voltage

Right-hand: 10.5 ~ 14 V

Left-hand: 16.0~ 19 V

Operating Temperature

-30°C ~ +60°C

Dual DSS Circular LNB Satellite LNBF Compatible W/ DISH NETWORK, DIRECTV, Bell